Elliptical head 1900 mm — profile diagram

Air receiversClarification filters

The elliptical head 1900 mm is used in medium and large vessels where the head must match the shell and process conditions. A working drawing is particularly useful for non-standard projects.

For D = 1900 mm, h2 = 475 mm. Manufacturing can follow GOST 6533-78 or agreed documentation with individual parameters.

Request a quotation

Specifications for elliptical heads 1900 mm

Parameter Value
Diameter D 1900 mm
Wall thickness S 3–22 mm
Elliptical dish depth h2 475 mm
Straight flange height h1 Depends on material thickness and project requirements
Head type Elliptical, flanged
Manufacturing process Cold flanging
Standards and documentation GOST 6533-78, GOST 34347-2017, GOST 34233.2-2017, technical specifications and customer drawings
Materials St3, St20, 09G2S, 17G1S, 08Kh18N10T, 12Kh18N10T and other specified steel grades
Application Vessels, tanks and process equipment according to the project
Heat treatment As required by the project
Quality inspection Checks of geometry, thickness, surface and compliance with the specification
Delivery Russia and CIS countries

Typical dimensions for D = 1900 mm

Thickness S, mm Straight flange height h1, mm Elliptical dish depth h2, mm Note
3 To be agreed 475 Individual drawing / technical specification
4 To be agreed 475 Individual drawing / technical specification
5 To be agreed 475 Individual drawing / technical specification
6 40 475 GOST 6533-78, Table 2
8 40 475 GOST 6533-78, Table 2
10 40 475 GOST 6533-78, Table 2
12 40 475 GOST 6533-78, Table 2
14 60 475 GOST 6533-78, Table 2
16 60 475 GOST 6533-78, Table 2
18 60 475 GOST 6533-78, Table 2
20 60 475 GOST 6533-78, Table 2
22 To be agreed 475 Individual drawing / technical specification

The straight flange height h1 is selected by diameter and thickness from GOST 6533-78, Table 2 (internal basic diameter). Sizes and thicknesses absent from that table, including 3 mm, require an agreed drawing or technical specification. h2 = D/4 for this elliptical profile.

Manufacturing elliptical heads 1900 mm

Cold forming and flanging of dished ends

For 1900 mm, profile repeatability over a large surface is important. Matching sets are inspected by comparing the key geometry parameters across the batch.

Checks during manufacturing include:

  • initial blank thickness and condition;
  • Diameter D = 1900 mm;
  • elliptical dish depth h2 = 475 mm;
  • knuckle geometry and uniformity;
  • component ovality;
  • surface and edge condition.

Applications of the elliptical head 1900 mm

Applications for 1900 mm include filter separators and EP/EPP drainage tanks.

Filtration equipment and drainage tanks have different purposes. These links describe applications rather than imply a shared construction.

Vessel equipment applications
Dished-end profile and manufacturing requirements

GOST 6533-78 — 1900 mm

For the catalogue elliptical profile of diameter 1900 mm, dish depth h2 = 475 mm, or 0,25 of D. Straight flange height h1 depends on thickness and the agreed configuration.

Germes-Ural manufactures heads 1900 mm with reference to GOST 6533-78, GOST 34347-2017, GOST 34233.2-2017, calculations and the technical specification. Non-standard parameters are recorded in the agreed drawing.

Ordering requirements for a head 1900 mm

When ordering 1900 mm, specify a single item or set. Batch marking and acceptance rules can be agreed in advance.

  • thickness S and material grade;
  • required straight flange height h1;
  • equipment application, medium, pressure and temperature;
  • edge preparation and welded joint requirements;
  • component quantity and completeness requirements;
  • marking by project positions or drawings;
  • drawing or technical specification for a project-specific configuration.
Materials for dished-end manufacturing

Materials for the head 1900 mm

Carbon and low-alloy steels

St3, St20, 09G2S, 17G1S, 20YuCh and Other steel grades

Stainless steels

08Kh18N10T, 12Kh18N10T, 10Kh17N13M2T, AISI 304, AISI 321, AISI 316Ti and equivalents

Aluminium alloys

AMg3, AMg5, AMg6 and other alloys by agreement

Titanium and special alloys

VT1-0, VT5, VT6, OT4-0 and other materials to the design documentation

Filter separator material follows the process and medium; EP/EPP tank material follows tank service conditions. Carbon, low-alloy and stainless configurations are reviewed for the project.

Geometry and quality inspection of dished ends

Quality inspection of heads 1900 mm

The main component parameters are checked before delivery. For a batch of D = 1900 mm, inspection covers compliance of each item with the drawing and geometry variation across the batch.

  • compliance of diameter D = 1900 mm;
  • elliptical dish depth h2 = 475 mm;
  • metal thickness;
  • ovality and knuckle geometry;
  • surface and edge quality;
  • compliance with GOST, technical specifications or the drawing.

Why choose Germes-Ural

  • Dished end manufacturing since 2004;
  • Our own manufacturing facility;
  • Head diameters from 100 to 4700 mm;
  • Metal thickness from 3 to 40 mm;
  • Manufactured to GOST, technical specifications and customer drawings;
  • Quality checks throughout manufacturing;
  • Delivery across Russia and CIS countries.

Frequently asked questions about the head 1900 mm

What dish depth and flange height are specified for elliptical head 1900 mm?

For diameter 1900 mm, the typical elliptical dish depth h2 is 475 mm, equivalent to 0,25D.

Can the head 1900 mm be used in filter separators and coalescing filters?

Elliptical heads are used in this equipment class, but the actual diameter, thickness, material and geometry must match the specific vessel design.

What information is needed for a quotation?

When ordering 1900 mm, specify a single item or set and agree batch marking and acceptance. Include D, thickness, material, h1, quantity, application and any drawing or specification.

Which material grades are available for elliptical head 1900 mm?

Yes, these materials are in the production range. The exact grade and thickness are confirmed after reviewing medium, temperature, pressure and design requirements.

Can elliptical head 1900 mm be manufactured to a drawing?

Yes. Manufacturing can follow GOST, technical specifications and individual customer engineering documentation.

Where can elliptical head 1900 mm be delivered?

A 1900 mm batch is packed so each component can be identified and sent to assembly without unnecessary repacking.

Packaging of dished ends

Delivery of elliptical heads 1900 mm across Russia

A 1900 mm batch is packed so each component can be identified and sent to assembly without unnecessary repacking.

Germes-Ural delivers across Russia and CIS countries. Supply details are confirmed for quantity, material, batch weight and destination.

Order elliptical heads 1900 mm

Provide diameter, thickness, material, quantity and equipment application. Germes-Ural specialists will confirm geometry and inspection requirements and prepare a quotation.

    Organization name

    Contact person

    Phone number*

    E-mail

    Steel grade

    Dished end diameter, mm

    Dished end thickness, mm

    Comments

    Attach a drawing or scanned document


    This page describes elliptical heads of diameter 1900 mm. The complete size range is listed under Elliptical heads.

    Other diameters of elliptical heads

    All sizes 1700 mm 1800 mm 2000 mm 2100 mm

    Other head types

    Torispherical Flanged conical heads Shallow dished heads Domed flanged heads Flat flanged heads Spherical heads

    Domed flanged headsFlanged conical headsFlat flanged heads