'/%3E%3C/svg%3E){kind=small}
The torispherical head 3100 mm Type C is an end component for a vessel, selected according to its design.
Germes-Ural manufactures Type C heads of diameter 3100 mm by cold flanging to GOST 34347-2017 and the agreed drawing. Strength calculations use GOST 34233.2-2017.
Specifications for torispherical heads 3100 mm Type C
| Parameter | Value |
|---|---|
| Diameter D | 3100 mm |
| Profile type | Torispherical, flanged, C |
| Wall thickness s | 6–22 mm; specific configuration subject to design calculations |
| Crown radius R | 2480 mm |
| Knuckle radius r | 477.4 mm |
| Dish depth h2 | According to the agreed drawing |
| Straight flange height h1 | Specified for the thickness and welded joint |
| Manufacturing process | Cold flanging |
| Documentation | GOST 34347-2017, GOST 34233.2-2017, technical specifications and customer drawings |
| Materials | Carbon, low-alloy and stainless steels; other materials as specified |
| Heat treatment | As required by the material and project |
| Inspection | Geometry, thickness, surface and compliance with the specification |
| Delivery | Russia and CIS countries |
Profile dimensions for D = 3100 mm, Type C
| D, mm | Type | R, mm | r, mm | s, mm | Heights h1 and h2 |
|---|---|---|---|---|---|
| 3100 | C | 2480 | 477,4 | 6–22 | According to the drawing |
R and r follow the company catalogue geometry for Type C: R = 0,8D and r = 0,154D, referenced to the internal surface. The table does not replace thickness calculations or agreement of the finished heights.
Manufacturing torispherical heads 3100 mm Type C
When manufacturing Type C, the crown and knuckle are checked against the Type C diagram. Radii and profile height cannot be changed independently while retaining the same designation. Straight flange, bevel and allowances are specified for the joint.
For diameter 3100 mm, agree the blank, joint preparation and finished Type C profile inspection plan. Radii R = 2480 mm and r = 477,4 mm are recorded in the working drawing together with thickness and surface requirements.
- Mating diameter 3100 mm and ovality
- Profile R=2480 mm, r=477,4 mm
- Finished part thickness
- Straight flange profile and edge preparation
- Surface condition and documentation requirements
Applications of torispherical heads 3100 mm Type C
Check the requirements for the equipment receiving the head: Heads for LPG storage tanks, Heads for cylindrical pressure vessels. These links describe the equipment applications; suitability of a specific head is confirmed by the equipment design.
Specify Type C separately from the diameter. Submit the equipment operating conditions, openings and additional loads for review of the selected profile.
Torispherical head 3100 mm Type C — GOST requirements
Type C uses its own crown and knuckle radius combination. It should not be described as a universal minimum-height option: dish depth follows the agreed profile and suitability follows the vessel calculation.
GOST 34347-2017 sets general manufacturing requirements for welded steel vessels; GOST 34233.2-2017 is used for calculations. The production range and profile radii are checked against the engineering documentation. For 3100 mm Type C, the catalogue specifies R = 2480 mm and r = 477,4 mm.
Loads from connected equipment — Type C
Piping weight and connection forces can load the head. For 3100 mm, submit the connections transferring forces to the head. These belong in vessel calculations as well as thickness selection.
For an order of 3100 mm Type C, state the drawing number and revision, material, thickness and acceptance requirements. Diameter 3100 mm does not replace the other specification requirements.
Materials
Carbon steels
20YuCh, 09G2S, St3sp5, St20, 17G1S
Aluminium alloys
AMg3, AMg5, AMg61 (1561), R-1407
Stainless steels
08(12)Kh18N10T, 10Kh17N13M2T, AISI 321, AISI 304, AISI 316Ti and Other
Titanium alloys
VT1-0, VT5, VT6, VT8, VT9, OT4-O
Quality inspection of heads 3100 mm Type C
Acceptance of Type C includes checks of the specified radii and heights and the actual finished thickness. Opening and connection positions are checked against the documentation. Weld inspection methods are agreed for each blank.
- Diameter 3100 mm checked against the specified datums
- Checks of radii 2480 and 477,4 mm
- Finished component thickness measurement
- Inspection of the surface and transition zone
- Checks of the straight flange, edge and opening positions
Why choose Germes-Ural
- Dished end manufacturing since 2004;
- Our own manufacturing facility;
- Torispherical heads: diameters 600–4200 mm;
- Torispherical head thickness: specified within the catalogue range;
- Manufactured to GOST, technical specifications and customer drawings;
- Quality checks throughout manufacturing;
- Delivery across Russia and CIS countries.
Frequently asked questions
Should piping loads be provided?
Yes, where connections transfer them to the head. Submit the design forces, moments and connection positions.
Is Type C always shallower than A and B?
There is no general rule for ordering. Installed height is determined from the complete profile and straight flange in the specific drawing.
What information is needed for a quotation?
Provide the design pressure and temperature, medium, material, thickness, profile drawing and quantity. For 3100 mm Type C, also specify R = 2480 mm and r = 477,4 mm.
What is the lead time for torispherical head type c 3100 mm?
The lead time is confirmed after reviewing the material, thickness, batch size and processing requirements. The indicative lead time of 7 days or more is confirmed in the quotation.
Which material grades are available for torispherical head type c 3100 mm?
The grade is selected to suit the shell material, medium, temperature and welding process. Availability of a particular combination is confirmed after reviewing the project.
Delivery of torispherical heads 3100 mm Type C
The head of diameter 3100 mm Type C is delivered after packaging and transport arrangements are agreed. Vehicle selection takes into account the actual dimensions, component weight and batch quantity.
Include the delivery destination and unloading restrictions in the enquiry. Protection of prepared edges and surfaces is agreed for the project and transport conditions.
Order torispherical heads 3100 mm Type C
Germes-Ural specialists will prepare a quotation and confirm the material, thickness and geometry requirements for your project.
This card describes diameter 3100 mm Type C. All sizes for this configuration and Other head types in 3100 mm.