'/%3E%3C/svg%3E){kind=small}
The torispherical head 2200 mm Type B is an end component for a vessel, selected according to its design.
Germes-Ural manufactures Type B heads of diameter 2200 mm by cold flanging to GOST 34347-2017 and the agreed drawing. Strength calculations use GOST 34233.2-2017.
Specifications for torispherical heads 2200 mm Type B
| Parameter | Value |
|---|---|
| Diameter D | 2200 mm |
| Profile type | Torispherical, flanged, B |
| Wall thickness s | 6–22 mm; specific configuration subject to design calculations |
| Crown radius R | 1980 mm |
| Knuckle radius r | 374 mm |
| Dish depth h2 | According to the agreed drawing |
| Straight flange height h1 | Specified for the thickness and welded joint |
| Manufacturing process | Cold flanging |
| Documentation | GOST 34347-2017, GOST 34233.2-2017, technical specifications and customer drawings |
| Materials | Carbon, low-alloy and stainless steels; other materials as specified |
| Heat treatment | As required by the material and project |
| Inspection | Geometry, thickness, surface and compliance with the specification |
| Delivery | Russia and CIS countries |
Profile dimensions for D = 2200 mm, Type B
| D, mm | Type | R, mm | r, mm | s, mm | Heights h1 and h2 |
|---|---|---|---|---|---|
| 2200 | B | 1980 | 374 | 6–22 | According to the drawing |
R and r follow the company catalogue geometry for Type B: R = 0,9D and r = 0,17D, referenced to the internal surface. The table does not replace thickness calculations or agreement of the finished heights.
Manufacturing torispherical heads 2200 mm Type B
Type B manufacturing requires the crown-to-flange transition to be agreed for its own profile. A Type A checking template cannot be used merely because the mating diameter is the same. Edge preparation and straight flange length are specified separately in the drawing.
For diameter 2200 mm, agree the blank, joint preparation and finished Type B profile inspection plan. Radii R = 1980 mm and r = 374 mm are recorded in the working drawing together with thickness and surface requirements.
- Mating diameter 2200 mm and ovality
- Profile R=1980 mm, r=374 mm
- Finished part thickness
- Straight flange profile and edge preparation
- Surface condition and documentation requirements
Applications of torispherical heads 2200 mm Type B
Check the requirements for the equipment receiving the head: Heads for cylindrical pressure vessels, Heads for horizontal air receivers. These links describe the equipment applications; suitability of a specific head is confirmed by the equipment design.
Specify Type B separately from the diameter. Submit the equipment operating conditions, openings and additional loads for review of the selected profile.
Torispherical head 2200 mm Type B — GOST requirements
Type B differs from Type A in the combination of crown and knuckle radii. Its larger relative knuckle radius is considered together with the crown radius. Selection is confirmed by the vessel design, including loads in the edge region.
GOST 34347-2017 sets general manufacturing requirements for welded steel vessels; GOST 34233.2-2017 is used for calculations. The production range and profile radii are checked against the engineering documentation. For 2200 mm Type B, the catalogue specifies R = 1980 mm and r = 374 mm.
Edge preparation for shell thickness — Type B
Head and shell thicknesses may differ. The transition and edge preparation must follow the documentation rather than be improvised during assembly. For 2200 mm, submit both thicknesses and the joint drawing.
For an order of 2200 mm Type B, state the drawing number and revision, material, thickness and acceptance requirements. Diameter 2200 mm does not replace the other specification requirements.
Materials
Carbon steels
20YuCh, 09G2S, St3sp5, St20, 17G1S
Aluminium alloys
AMg3, AMg5, AMg61 (1561), R-1407
Stainless steels
08(12)Kh18N10T, 10Kh17N13M2T, AISI 321, AISI 304, AISI 316Ti and Other
Titanium alloys
VT1-0, VT5, VT6, VT8, VT9, OT4-O
Quality inspection of heads 2200 mm Type B
Type B checks cover the radii of the selected configuration, mating profile and finished thickness. Inspection datums for the crown and edge regions are agreed for acceptance. Checks of welded blanks follow the order documentation.
- Diameter 2200 mm checked against the specified datums
- Checks of radii 1980 and 374 mm
- Finished component thickness measurement
- Inspection of the surface and transition zone
- Checks of the straight flange, edge and opening positions
Why choose Germes-Ural
- Dished end manufacturing since 2004;
- Our own manufacturing facility;
- Torispherical heads: diameters 600–4200 mm;
- Torispherical head thickness: specified within the catalogue range;
- Manufactured to GOST, technical specifications and customer drawings;
- Quality checks throughout manufacturing;
- Delivery across Russia and CIS countries.
Frequently asked questions
Can the head be welded to a thinner shell?
Feasibility and joint configuration follow the design. Submit thicknesses, materials and the welded joint detail for review.
Can A be replaced with B without changing the design?
No. B uses different R and r ratios. Equal mating diameters do not establish strength, height or vessel compatibility.
What information is needed for a quotation?
Provide the design pressure and temperature, medium, material, thickness, profile drawing and quantity. For 2200 mm Type B, also specify R = 1980 mm and r = 374 mm.
What is the lead time for torispherical head type b 2200 mm?
The lead time is confirmed after reviewing the material, thickness, batch size and processing requirements. The indicative lead time of 7 days or more is confirmed in the quotation.
Which material grades are available for torispherical head type b 2200 mm?
The grade is selected to suit the shell material, medium, temperature and welding process. Availability of a particular combination is confirmed after reviewing the project.
Delivery of torispherical heads 2200 mm Type B
The head of diameter 2200 mm Type B is delivered after packaging and transport arrangements are agreed. Vehicle selection takes into account the actual dimensions, component weight and batch quantity.
Include the delivery destination and unloading restrictions in the enquiry. Protection of prepared edges and surfaces is agreed for the project and transport conditions.
Order torispherical heads 2200 mm Type B
Germes-Ural specialists will prepare a quotation and confirm the material, thickness and geometry requirements for your project.
This card describes diameter 2200 mm Type B. All sizes for this configuration and Other head types in 2200 mm.